nueBattery for CDMA Touch Pro / Diamond is an up-to-date version of my modified battery driver for the CDMA Touch Pro / Diamond. It now includes:

-1% Battery Increments
-FastCharge, which allows you to draw up to 900mA from a USB port (or other charger that your phone thinks is just a USB port)
-DisableFlightMode, which stops your phone from entering flight mode whenever your battery is low (because your phone is useless anyway if you can’t get calls right?)

I included a simple switching app to make it easy to switch between modes, registry edits are no longer required. Please be sure to pay attention to the FastCharge warning, I’m not responsible if FastCharge somehow blows your usb port or charger. If you can’t sync after enabling FastCharge, disable it, most likely your USB port has aggressive overcurrent protection.

If there is interest in GSM land for this, I’ll take a look there too, as well as getting these features ready for the Titan.

Download nueBattery here. Note that to see the 1% increments you need to install nuePowerCPL as well, nueBattery just enables (unlocks) 1% increments on the driver side.

I’ve successfully created a driver that displays 1% increments for the CDMA Diamond. Note that this is for the CDMA Diamond only. Special thanks to Ghettofreeryder for testing and Cmonex for locating the rounding function.

http://www.nuerom.com/BlogEngine/page/nuePower.aspx

 
After some hours of work and tracking down Canadians, we (cmonex, no2chem and tobeychris … well, mainly cmonex) have gotten an SSPL working on the diamond… (picture courtesy of tobeychris).
So special thanks to cmonex, pretty soon your CDMA Diamond will be running SPL 0.43.CMONEX!

Also, in other news, nueROM 3 is announced…

From the CDMA Diamond:
info 2>
"HTCstelus001[^}<HTCE
info 7>
HTC Integrated Re-Flash Utility, Common Base Version : 1.51d
Device Name: Diamond_C, Bootloader Version : 0.57.0000
Built at: Jul 17 2008 20:54:36
Copyright (c) 1998-2007 High Tech Computer Corporation
Board ID=0x80
gCurrentPanel=0x1
CPU ID=0x4117B362
AMSS7501A
MicroP-Diam Version : 11
PSOC-Diam STAGE_EVT v20
RAM SIZE : 256MB
SMI size : 32MB

The device name is DIAM500. To enter bootloader, press Reset+Power+VolumeDown.

The Telus ROM and SPL is attached. The version on the ROM is v1.06. Due to missing "rtask” commands in the bootloader, we were unable to extract the radio. To dump the ROM, you probably want to use “imgfstodump part02.raw” with tadzio or mamaich’s imgfstools. Special thanks to CNeufeld and jackojack for getting this dumped. This is NOT intended for flashing. DO NOT ATTEMPT TO FLASH THIS ROM ONTO ANY DEVICE.

1.06, Standalone Package (.rar) | 80.25 MB | 660 downloads
Click here for other and older versions.

After walking jackojack and CNeufeld through dumping SPL and such off the CDMA diamond, we’ve managed to extract the SPL and a dump of the ROM.

I’ll be posting the results and a download link shortly.